材料与物理研究所
- 姓名: 李殿中
- 性别: 男
- 职称: 研究员
- 职务:
- 学历:
- 电话:
- 传真:
- 电子邮件: dzli@gia.cas.cn
- 所属部门:
- 通讯地址:
李殿中,中国科学院院士,博士,研究员,博士生导师。
1985.09--1989.07 哈尔滨工业大学材料科学与工程系,铸造专业,获学士学位
1996.03--1998.12 哈尔滨工业大学材料科学与工程系,材料加工工程专业,获博士学位
1998.06 入选中国科学院院级人才计划
2001.05--2026.07 中国科学院金属研究所研究员
(其间:2001.01--2001.12英国伯明翰大学皇家学会访问学者;2003.04--2008.01 中国科学院金属研究所特殊环境材料研究部副主任;2008.01--2018.11 中国科学院金属研究所材料加工模拟研究部主任;2018.11--2025.04 中国科学院金属研究所先进钢铁材料研究部主任;2023年11月当选中国科学院院士)
2025.04--至今 任中国科学院金属研究所学术委员会主任
2026.07--至今 任中国科学院赣江创新研究院院长
简 历:
社会任职:
长期从事高端装备金属材料及加工技术研究,在凝固偏析理论、高纯金属与合金、低氧钢与特殊钢大型构件研制等方面取得了系统性创新成果,贯通了基础研究、技术开发与工程应用全链条。
研究方向:
承担科研项目情况:
研究成果成功应用于大型盾构机主轴承、高档机床主轴承、航空发动机主轴承、大型水轮机转轮、大型船用曲轴、舰船宽厚板、核电大型锻件等核心部件的极限加工制造,满足了高端装备亟需,经济效益和社会效益显著。在Nature Materials、Acta Materialia、《金属学报》等期刊上发表学术论文400余篇,获授权国家发明专利100余项,出版论著2部、译著1部。
1. Cai X, Hu XQ, Lu XY, Liu HW, Cao YF, Li DZ. Exploring the ultrahigh rolling contact fatigue life of M50 bearing steel by adjusting the cryogenic sequence. Journal of Materials Science & Technology. 169 (2024):243-250.
2. Xia YF, Deng L, Chen XJ, jia CN, Yang ZD, Zhu JS, Zhang X, Wang P, Li DZ. Parametric modeling and finite element analysis of triangular strand wire rope. ENGINEERING STRCUTYRES. 314 (2024): 118398.
3. Liu HH, Ma H, Du NY, Fu PX, Liu HW, Cao YF, Sun C, Guo QW, Chen XQ, Li DZ. Probing rare earth segregation in steels. Scripta Materialia. 230 (2023): 115407.
4. Li YH, Jiang ZH, Wang P, Li DZ, Li YY. Effect of a modified quenching on impact toughness of 52100 bearing steels. Journal of Materials Science & Technology. 160 (2023): 96-108.
5. 李殿中, 王培. 金属材料的组织定制. 金属学报. 59 (2023): 447-456.
6. Li DZ, Wang P, Chen XQ, Fu PX, Luan YK, Hu XQ, Liu HW, Sun MY, Chen Y, Cao YF, Zheng LG, Gao JZ, Zhou YT, Zhang L, Ma XL, Dai CL, Yang CY, Jiang ZH, Liu Y, Li YY. Low-oxygen rare earth steels. Nature Materials. 21 (2022): 1137-1143.
7. Du NY, Liu HH, Cao YF, Fu PX, Sun C, Liu HW, Li DZ. In situ investigation of the fracture of primary carbides and its mechanism in M50 steel. Materials Characterization. 186 (2022): 111822.
8. Ren JK, Sun MY, Chen Y, Xu B, Liu WF, Jiang HY, Cao YF, Li DZ. The non-dendritic microstructure arising from grain boundary formation and wetting: A phase-field simulation and experimental investigation of semi-solid deformation. Materials & Design. 223 (2022): 111111.
9. Zhang HL, Zhang GQ, Zhou HC, Liu ZH, Xu B, Hao LH, Sun MY, Li DZ. Influence of cooling rate during cryogenic treatment on the hierarchical microstructure and mechanical properties of M54 secondary hardening steel. Materials Science and Engineering: A. 851 (2022): 143659.
10. Yang LQ, Xue WH, Gao SY, Liu HW, Cao YF, Duan DL, Li DZ, Li S. Study on sliding friction and wear behavior of M50 bearing steel with rare earth addition. Tribology International. 174 (2022): 107725.
11. Du NY, Liu HH, Cao YF, Fu PX, Sun C, Liu HW, Li DZ. Formation mechanism of MC and M2C primary carbides in as-cast M50 bearing steel. Materials Characterization. 174 (2021): 111011.
12. Zhang HL, Sun MY, Liu YX, Ma DP, Xu B, Huang MX, Li DZ, Li YY. Ultrafine-grained dual-phase maraging steel with high strength and excellent cryogenic toughness. Acta Materialia. 211 (2021): 116878.
13. Wang JQ, Liu S, Xu B, Zhang JY, Sun MY, Li DZ. Research progress on preparation technology of oxide dispersion strengthened steel for nuclear energy. International Journal of Extreme Manufacturing. 3 (2021): 032001.
14. Ma H, Wu LP, Liu C, Liu MF, Wang CG, Li DZ, Chen XQ, Dong JH, Ke W. First-principles modeling of the hydrogen evolution reaction and its application in electrochemical corrosion of Mg. Acta Materialia. 183 (2020): 377-389.
15. Zhang JY, Xu B, Tariq NU, Sun MY, Li DZ, Li YY. An innovative approach for grain refinement in Ni-based superalloys: Modification in the classical delta process through gamma'' pre-aging treatment. Journal of Alloys and Compounds. 818 (2020): 152827.
16. Xie BJ, Sun MY, Xu B, Wang CY, Jiang HY, Li DZ, Li YY. Oxidation of stainless steel in vacuum and evolution of surface oxide scales during hot-compression bonding. Corrosion Science. 147 (2019): 41-52.
17. 李殿中. 集成材料计算模拟: 金属制备工艺研究的新范式. 金属学报. 54(2) (2018): 129-130.
18. Guo YF, Cao YF, Sun MY, Xu B, Li DZ. Effects of liquid fraction on the microstructure and mechanical properties in forge solidifying 12Cr1MoV steel. Journal of Materials Processing Technology. 256 (2018): 25-35.
19. Li DZ, Chen XQ, Fu PX, Ma XP, Liu HW, Chen Y, Cao YF, Luan YK, Li YY. Inclusion flotation-driven channel segregation in solidifying steels. Nature Communications. 5 (2014): 5572.
著作
1. 李殿中,孙明月,王培等著,高品质特殊钢与大型构件制备技术,科学出版社,2025,北京。
2. 李依依, 李殿中, 朱苗勇等著, 金属材料制备工艺的计算机模拟, 科学出版社, 2006, 北京.
3. 约翰·坎贝尔(著), 李殿中,李依依(译), 铸造原理, 科学出版社, 2011, 北京.
代表论著:
专利申请:
2023年4月获中华全国总工会全国五一劳动奖章;
2022年6月获辽宁省科学技术奖励一等奖(第一完成人);
2021年6月获全国优秀共产党员荣誉称号;
2021年6月获国家知识产权局中国专利金奖第一发明人;
2019年2月获辽宁省科学技术奖励一等奖(第一完成人)
2017年5月获中国科协首届全国创新争先奖状;
2017年2月获辽宁省“杰出科技工作者”荣誉称号;
2014年获人力资源和社会保障部有突出贡献中青年专家荣誉称号;
2014年获“全国优秀科技工作者”荣誉称号;
2012年获国家科学技术进步二等奖(第一完成人);
2009年获中国科学院杰出科技成就奖(集体奖,突出贡献者);
2007年10月获何梁何利科学与技术创新奖:青年奖。
